Wild Boar Fender Ornament

Snotty, untamed, with raging red eyes, this bad guy makes a real statement about your ride. Two piece construction allows easy installation and bulb replacement. Compatible with any 12 volt power source. Universal fitment.

INSTALLATION INSTRUCTIONS

Eagle Front Fender Ornament

This bird is the word! Your front fender will take on new life with our majestically sculpted chrome and gold eagle with amber lighted eyes. One screw and the top comes off for easy bulb replacement.

INSTALLATION INSTRUCTIONS

ISO-Flame Grips

Our ISO-Flame Grips have a unique flamed pattern in the soft and cushy raised rubber pads. Finished off with a Maltese Cross emblazoned end cap and smooth trim ring for that additional bad attitude look.

This grip accepts our wildly popular ISO-Throttle Boss, which greatly aids your hand on those long rides to the next rally.

INSTALLATION INSTRUCTIONS

Pilot Grips (pr) with Throttle Boss (ea)

Either by themselves or used along with our line of Pilot footpegs, Pilot Grips are a great addition to your scooter. Comfortable raised rubber pads provide a secure grip area, while the chrome body adds a subtle accent to highlight other accessories.

For an added measure of comfort, a specially designed Throttle Boss™ is also available.

6204 INSTALLATION INSTRUCTIONS
6203 INSTALLATION INSTRUCTIONS

Maltese Cross End Caps

Replacements for ISO-Flame Grips or styling update for ISO-Grips. Includes standard length screws.

ISO-Grip End Cap
Replacements for ISO-Grips or styling update for ISO-Flame Grips. Includes standard length screws.

Stiletto End Caps for ISO-Grips (pr)

Simply replaces the existing end cap on Küryakyn ISO™-Grips or ISO™-Flame Grips. Installation is a breeze. Screws supplied for use with or without ISO™-Throttle Boss™.

INSTALLATION INSTRUCTIONS

Clutch Cable Adjuster Cover

Here is a classy cover to hide the crude, zinc plated cable adjuster. It's simple, two piece design encapsulates the threaded adjuster. It installs in moments with easy to handle spring clips and can be removed just as quickly should you need to adjust your cable.

INSTALLATION INSTRUCTIONS

Chrome Throttle and Idle Cable covers (set)
Fits: All '82-'08 Models with 90 Degree Cable Elbows.

You've chromed your switch housings and controls, installed custom mirrors and grips, now it's time to finish the job with our Chrome Throttle and Idle Cable Covers. We offer a quick and easy way to cover the zinc plated metal elbows found on your stock cables. Installation only takes a couple of minutes and requires no disassembly of your controls or cables; the two-piece covers are held together by c-clips.

Fits: All '82-'08 Models with 90 Degree Cable Elbows.

INSTALLATION INSTRUCTIONS

Switch Housing Cover
for Models with Standard Switches (set)
Fits: '96-'08 H-D Models (ex. '08 Touring and '03-'08 Sportster)
Available Summer 2008

The nice thing about chrome handlebar accents is that you, the rider, can enjoy them every time you’re in the saddle. You’ll especially like these Chrome Switch Housing Covers because installation is so easy, they go on right over the stock switch assemblies! No disassembly and no fumbling with tiny, easy to lose parts!

Best of all, since they’re made for use with our Chrome Handlebar Dress-up Kits, you’ll enjoy the spectacular view of a tricked out set of bars mile after mile!

Note: Motorcycle must be equipped with Küryakyn Handlebar Control Dress-up Kit P/N 9119 or 9126) or H-D Handlebar Reservoir Cover Set (H-D P/N's 46099-98 or 46098-98).

Clutch Cable Ferrule Cover (ea)
Fits: '84-'08 H-D Clutch Cables

Get rid of that rusted, oxidized clutch cable ferrule and banjo bolt. These install in seconds. The banjo bolt covers also fit the banjo bolts on the brake calipers.

2012 INSTALLATION INSTRUCTIONS
2014 INSTALLATION INSTRUCTIONS
2016 INSTALLATION INSTRUCTIONS

Zombie™ Mirror

We’ve taken your run-of-the-mill skull and added 35% more angst and 20% more anguish to make these the nastiest mirrors on the street. Overall, the mirror head is about 3” x 4” with round glass 3” in diameter. The smoothly arched stem positions the center of the mirror head about 4-3/8” above and 5-1/2” outboard of the mounting point on the handlebar control. The adjustment mechanism is unlike anything out there; the swivel ball is captured between opposing pins. The pins are threaded to allow quick and easy tension adjustment. Hardware for a variety of H-D mounting applications is included.

Not Recommended for Buckhorn Handlebars.

INSTALLATION INSTRUCTIONS

Handlebar Clamp

The perfect solution for mounting a variety of accessories. This chromed metal 1” Handlebar Clamp is a universal mount for 1” bars. It’s excellent for mounting mirrors but is also a great assistant in mounting other accessories for your bike.

• Universal accessory mounting hole is 5/16” diameter by 13/16” through depth
• Universal accessory mounting hole center is approximately 1/2” from the edge of 1” mounting hole

Big 'uns t-bar (ea)

Küryakyn Burly and Big'uns T-Bars offer excellent quality at an affordable price. Burly T-Bars are 1-1/4" diameter and are offered in 6", 8", or 10" rise. Big'uns T-Bars are 1-1/2" in diameter and are offered in 5", 7", or 9" rise. The bars are drilled for hidden wiring and accept stock H-D as well as most aftermarket controls.

Smooth Style Pullback Risers

These risers are a full 6-1/2 inch tall of meaty chrome plated steel - enough to satisfy the greatest hunger. Comes with individual heavy-duty top clamps for a complete customized look