(714) 920-2320
(714) 920-1588
(714) 897-7473

M-F 9 am - 6 pm
Sat.  9 am - Noon
Pacific Standard Time


Call for SPECIAL DISCOUNT PRICING
on ALL Kuryakyn products!

 

Skull Air Cleaner Kits
Fits '91-'06 Sportster Models with CV Carb
Not for the faint of heart, our new Skull Air Cleaner kits are a vile and sinister addition to any bad-ass ride. The outer cover is the same high-strength, extremely rigid composite cover we sell for S&S carbs. These kits also include a backing plate and high-flow filter element as well as any necessary brackets, crankcase breathers or hardware required for a quick and easy installation.
Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See Air Cleaner Accessories Page for complete adapter listings.

Skull Air Cleaner Cover for S&S
Dirty, mean, and nasty... this replacement cover for S&S E or G series air cleaners will send chills down your spine and send the neighbor kids running for their mothers. The skull’s wicked eyes and snarling jaw flow cleanly down the side of the cover. Constructed of a high-strength, extremely rigid, chrome plated composite material, this cover looks great and is quick and easy to install with the supplied hardware. Available in Chrome or Satin Black.

 #9941 Skull Air Cleaner Kit (ea) Fits '91-'06 Sportster Models with CV Carb
 $239.99

INSTALLATION INSTRUCTIONS




Hi-Five Air Cleaner Kit
The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this unit packs a ton of performance into a relatively small package.

Features:
• Chrome plated, die-cast construction.
• Large slotted openings for excellent airflow.
• An exclusive K&N filter, designed by Küryakyn, passes smoothed and filtered air through its sides and outer end.
• Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow.
• Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).

Hi-Five Air Cleaners come complete with mounting hardware and crankcase breather kits. Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See Air Cleaners Accessories Page for complete adapter listings.

 #9482 Hi-Five Air Cleaner Kit (ea) Fits '91-'06 XL Models with CV Carb
$229.99
 #9469  Replacement Filter for Hi-Five Air Cleaner Kit
$ 72.99

INSTALLATION INSTRUCTIONS


Corsair Air Cleaner
We tested many of our competitor’s forward facing aircleaners and found them to be very restrictive. We designed many models until we settled on this very aggressive, free flowing, truly high-performance unit. The chrome-plated die-cast housing with high-flow filter element supplied by Advanced Flow Engineering (aFe) is easy to install and air-flow will support performance engines in excess of 100 HP.

Note: Installation of this air cleaner may decrease rider leg room. Please reference dimensions provided and determine if installation will adversely affect safe and comfortable operation of the motorcycle before making your purchase. This is especially important for riders with shorter legs.

 #9860 Corsair Air Cleaner (ea) Fits: '91-'06 XL Models with CV Carb
$319.99
 #9858 Replacement Filter Element for Corsair (ea)
$69.99

INSTALLATION INSTRUCTIONS


Pro-Series Hypercharger with Chrome Body and Black Butterflies
U.S. Patent # 5,307,771 Fits '91-'06 XL with CV Carb.

Capable of supporting engine builds that produce up to 110 H.P.  You’ll be able to spot this distinctive design a mile away. The body is 1/2" wider and nicely contoured. One piece construction, ball-milled “speed lines”, symmetrical butterflies, and “Pro” embossed bearing cups give this performance weapon a look that screams horsepower!  The Pro-Series hypercharger fits Stock or 44mm C.V. style carbs, and can be easily adapted to Mikuni HSR42/45/48 and S&S Shortys. Pro-Series Hyperchargers come complete with mounting hardware and crankcase breather kits.  P/N 9302 now includes a vacuum adapter. No need to drill induction module!

 # 9300  Pro-Series Hypercharger with Chrome Body and Chrome Butterflies
Fits '91-'06 XL with CV Carb.
$289.99
 # 9303 Pro-Series Hypercharger with Chrome Body and Black Butterflies
Fits '91-'06 XL with CV Carb.
$289.99

#9300 INSTALLATION INSTRUCTIONS
#9303 INSTALLATION INSTRUCTIONS


Hypercharger with Blood Groove Trap Door
91-'06 XL with Stock Carb includes Küryakyn Crankcase Breather.

Küryakyn offers a select number of complete Hypercharger kits assembled with a Blood Groove style trap door. The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive performance no matter which style you choose. Complete kits are listed for most popular applications.

 #9996 Hypercharger with Blood Groove Trap Door
91-'06 XL with Stock Carb includes Küryakyn Crankcase Breather.
 $269.99

INSTALLATION INSTRUCTIONS


Hypercharger with Blood Groove Trap Door
'91-'06 XL with Stock Carb includes Küryakyn Crankcase Breather.

Küryakyn offers a select number of complete Hypercharger kits assembled with a Blood Groove style trap door. The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive performance no matter which style you choose. Complete kits are listed for most popular applications.

 #9989 Hypercharger with Blood Groove Trap Door
'91-'06 XL with Stock Carb includes Küryakyn Crankcase Breather.
$289.99

INSTALLATION INSTRUCTIONS



Hypercharger with Blood Groove Trap Door
Fits '01-'05 Twin Cam with Delphi EFI, includes Küryakyn Crankcase Breather.

Küryakyn offers a select number of complete Hypercharger kits assembled with a Blood Groove style trap door. The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive performance no matter which style you choose. Complete kits are listed for most popular applications.

# 9998 Hypercharger with Blood Groove Trap Door
Fits '01-'05 Twin Cam with Delphi EFI, includes Küryakyn Crankcase Breather.
$289.99

INSTALLATION INSTRUCTIONS


3" Bullet Tachometer

Add this pristine 3" Bullet Tachometer to your bike and gain accurate engine performance and style! Choose between the White Face with 7 Color L.E.D. Lighting Tachometer or the Black Face Tachometer with backlighting. With 0-8,000 RPM range this tachometer is designed specifically for motorcycles to eliminate tach bounce. Includes everything you need for a swift and easy installation. Now you'll love watching your RPM's!

Note: Tachometers have a 3" diameter and are 3.5" long.Note: Colors are Yellow, Lt. Blue
, Violet, Red, Green, Blue, Pale Blue or rotate through all colors

#388 3" Bullet Tachometer, Black Face (kit)
Fits Universal 1" Bars for H-D and Metric Cruisers. Works with both single and dual fire ignition.
$199.99
#389 3" Bullet Tachometer, 7-Color LED Face (kit)
Fits Universal 1" Bars for H-D and Metric Cruisers. Works with both single and dual fire ignition.
$219.99

Vented Flush-Mount Gas Cap (R.H. Thread)
Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa's Buick. These slick flush mount gas caps have the high-tech look of aviation-style fuel fillers. The built in trim ring protects the painted surface around the filler opening from dings and gas stains. A keyed entry system permits their ultra thin profile and prevents tampering.

Vented and non-vented versions available to fit all screw type H-D tanks from '82-'08. Installation does not require cutting.

# 8309 Vented Flush-Mount Gas Cap (R.H. Thread)
$49.99

INSTALLATION INSTRUCTIONS


Speedo/Tach Visor (ea)
Universal Speedometers and tachometers 3-3/4" diameter with 7/16" of exposed bezel/sidewall

Designed by Who Did It, Inc.
Easily affixes to the speedometer. Besides the sleek appearance, you'll really appreciate the reduction in glare if you run a windshield

# 4015 Speedo/Tach Visor (ea) Fits '04-'06
$25.99

INSTALLATION INSTRUCTIONS


Flamin Pegs with Male Mount

Flames add class and timeless design to your bike. These pegs can be used in any footpeg application. Coordinnate these pegs with our ISO®-Flame Grips for a torchin' hot look!

# 4416 Flamin Pegs with Male Mount (pr)
$103.99
# 4417 Flamin Pegs without Adapter (pr)
$93.99

4416 INSTALLATION INSTRUCTIONS
4417
INSTALLATION INSTRUCTIONS


Stiletto Pegs, Male Mount (pr)

The radical Stiletto Peg is designed for those who ride on the wild side. The line includes pegs, pegs with stirrups, a shift peg, and a brake pedal pad ready to outfit any H-D model using male mount pegs

# 4475 Stiletto Pegs, Male Mount (pr)
$103.99
# 4479 Stiletto Shift Peg (ea)
$28.99
# 4477 Stiletto Pegs with Strap (pr)
$176.99

4475 INSTALLATION INSTRUCTIONS
4479 INSTALLATION INSTRUCTIONS
4477 INSTALLATION INSTRUCTIONS


Kaiser Pegs, Male Mount (pr)

These are the ultimate chopper footpegs. From the Maltese Cross insert to the spire pointed end, these pegs are old-school custom. Like all Küryakyn pegs, the ends are interchangeable so our extensions or female ends are quickly and easily changed. Comes with male mount end.

Dimensions: 5-1/2" x 2-1/4"

# 4460 Kaiser Pegs, Male Mount (pr)
 $103.99

INSTALLATION INSTRUCTIONS


Liberator Pegs (pr) H-D Style Male Mount

Escape the tyranny of mundane pegs with Kuryakyn Liberator Pegs! Barrel-shaped chrome bodies and perforated rubber pads, these pegs are ready to defend freedom everywhere. The Liberator series includes footpegs, footpegs with stirrups, a shift peg and a brake pedal pad.

#4595 Liberator Pegs (pr) H-D Style Male Mount $124.99

INSTALLATION INSTRUCTIONS


Widow Shift Peg (ea)

The Widow family is getting bigger! A shift peg, Brake pedal pads and stirrup heel rests have crawled out of the shadows in the Kuryakyn R&D department. Their wicked, spider themed designs look awesome by themselves or with the rest of Kuryakyn's Widow accessories.

#4494 Widow Shift Peg (ea)
$39.99

INSTALLATION INSTRUCTIONS


Widow™ Pegs (pr)

Set your bike apart from the crowd. A full custom footpeg at a realistic price. Bet you get a bunch of compliments on these and your feet will love 'em too.

# 4491 Widow™ Pegs (pr)
Fits H-D Male Mount Applications
$103.99

INSTALLATION INSTRUCTIONS


Widow Pegs and Stirrups (pr)

Set your bike apart from the crowd. A full custom footpeg at a realistic price. Bet you get a bunch of compliments on these and your feet will love 'em too. Available for any H-D application.

# 4423 Widow Pegs and Stirrups (pr) H-D Style Male Mount
$166.99

INSTALLATION INSTRUCTIONS



Zombie™ Pegs with Male Mount

Our Zombies are taking over! Unique style and durability make these pegs, brake pedal pads, and shift peg a stunning addition to your bike. All feature beautiful chrome with durable rubber pads and our ominous Zombie skull. To make a wicked thing even better, Küryakyn offers many other Zombie accessories so you can carry this theme throughout your bike.

# 4470 Zombie Pegs (pr)
$103.99
# 4414  Zombie Shift Peg (ea) Available May 2008
$25.99

INSTALLATION INSTRUCTIONS



Male Mount ISO®-Pegs

Get ready to fall in love. ISO-Pegs dampen vibrations plus give your scoot that custom look, all at the same time. The industry’s most comfortable footpegs feature hollow-core, long-lasting neoprene rubber inserts which are isolastically mounted on a special grade 8 chrome socket head bolt. They have a soft, cushiony feel, and the adapter ends are interchangeable. If you’re tired of broken O-rings or drab-looking stock pegs, these are for you.

# 8000 Small Male Mount ISO-Peg (pr) Includes Chrome Mounting Hardware.
$46.99
# 8002 Large Male Mount ISO-Peg (pr) Includes Chrome Mounting Hardware
$47.95
# 8028  Dually Male Mount ISO-Peg (pr)
$72.99

8000 INSTALLATION INSTRUCTIONS
8002 INSTALLATION INSTRUCTIONS
8028 INSTALLATION INSTRUCTIONS


Brake Rod Cover for Sportster
Fits: ’04-’08 XL1200C and XL883C (Also fits ’04-’08 Sportster models equipped with H-D accessory forward controls, H-D P/Ns 33395-04 or 33398-04)

Take your plain zinc plated brake rod to full chrome look with our precision fitted chrome cover. No tools needed to install this “snap-on” show-chromed cover that hides the ends and melds nicely with the rest of your sparkling engine. We’ve got your brake rod covered!

# 9042 Brake Rod Cover (ea)
Fits: ’04-’08 XL1200C and XL883C (Also fits ’04-’08 Sportster models equipped with H-D accessory forward controls, H-D P/Ns 33395-04 or 33398-04)
$29.99

INSTALLATION INSTRUCTIONS



Call for SPECIAL DISCOUNT PRICING on ALL Kuryakyn products!