Spun Blade Spinning Axle Caps with Pointed Center Cap
For ’88-’07 Sportster

Take a trip back in time and set your bike apart from the rest. Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome plated blades start to spin when the bike reaches 25 mph. Choose a pointed center cap to add that additional cool factor to your bike.

INSTALLATION INSTRUCTIONS

Spun Blade Spinning Axle Caps with Zombie™ Center Cap
Fits: ’88-’07 Sportster

Take a trip back in time and set your bike apart from the rest. Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome plated blades start to spin when the bike reaches 25 mph. Choose a Zombie center cap to add that additional cool factor to your bike.

INSTALLATION INSTRUCTIONS

Stiletto Axle Caps
Aggressively styled, these axle caps let everyone know who’s the boss. By themselves or coupled with other accessories from the Stiletto line, these axle caps are killer! Three styles are offered to fit late model Harley-Davidsons.

INSTALLATION INSTRUCTIONS

Caliper Skins
Fits: All ’00-’03 XL Models (ex. 883C & 1200C),

It’s every hard-working caliper’s dream to go first class in luxurious, contoured chrome. These Caliper Skins give your bike the look of high-tech 6-piston calipers without the expense, plus make it a lot easier to keep the caliper area clean. The two-piece clamshell design makes this cover easy to install.

Note: When installing caliper skins check for clearance with valve stems. Lengths and location of valve stems will vary.

INSTALLATION INSTRUCTIONS

Fork Skins™

Nearly every biker lusts after the seductive gleam of a finely chrome-plated front end. But when you add up the related costs of the actual plating, new seals, new fork oil, axle caps, chrome hardware, labor, and (to keep this comparison accurate) a chrome fork brace, the final bill is realistically around $450 - not to mention a couple weeks of downtime.

Fork Skins™ Fork Slider Cover Set will chrome out 39mm or unshrouded 41mm front ends and provide the improved handling associated with a fork brace for less than half the cost estimate above – with no down time.

This kit is extremely quick and easy to install. Only a few wrenches and about 20 minutes is needed to transform the ordinary to the spectacular.

Rear Master Cylinder Cover for Sportster
Fits all '84-'03 XLs.
U.S. Patent # 409,119

Did you ever notice that the industrial chrome finish on an XL master cylinder doesn't match anything else on the bike? Nobody will notice it on your bike, once you add our new rear master cylinder cover. This beautifully chromed cast cover features the blood groove design found on many of our other accessories. Fits all '84-'03 XLs.

INSTALLATION INSTRUCTIONS

Chrome Reflector Covers

Finished in traditional lustrous Küryakyn chrome, these louvered chrome covers will stylize those unsightly front and rear reflectors while heightening visibility.

P/N 9001 Fits: Motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector.  Please check fitment prior to purchase.

INSTALLATION INSTRUCTIONS

Lazer Nodes™
You can see if you have spark without pulling the plugs - you'll see a flash of light every time your plugs fire. Cut your wire wherever you want Lazer Nodes™ and install in minutes.

Chasing L.E.D. Timing Cover
Fits: '86-'08 XL
Patent Pending

Like a window into your motor’s soul, the mesmerizing effect of the chasing lights moving in rhythm with engine speed give life to the heart of your bike. Select red, lime, ice blue, sky blue, dark blue, purple or green, or hues fading continuously from one to the next spinning circles timed by engine RPMs. Or if desired, single or continuously changing colors may be lit solidly. This easily installed kit contains chrome timing cover with multi-function L.E.D.’s, wiring and controller.

Scorpion Spark Plug Head Bolt Covers for Evolution
Fits  XL. (Does not fit ’04-'08 XL or Screamin’ Eagle Evolution head).

The true original. These high quality covers place a fine chrome finish on hardware that easily becomes rusty or corroded. Silicone rubber inserts are resistant to all the heat the engine can dish out, and hold the covers securely in place. Installs in minutes with no tools.

Stiletto™ Head Bolt Covers
Fits all H-D models '87-'08.

Bring the cutting edge look of Küryakyn's Stiletto line to your top end with our New Head Bolt Covers. Beautiful chrome and simple installation.

Skull Horn Cover

Fits over Existing Horn Cover

Tappet Block Covers for XL
Fits '91-'03 XL

These Tappet Block Covers change the stock cast aluminum or wrinkle black finish to glistening chrome. Featuring our blood groove design, they match the styling of several of our other accessories perfectly. Simple, four-bolt installation requires only one Allen wrench, and about five minutes of your time.

Smooth Chrome CV Carburetor Top
Fits all CV carburetors '88 -'06 

These chrome covers really perk up your stock carburetor.

Cylinder Base Cover for Sportsters

This great looking, easy-to-install cylinder base cover looks awesome on Sportster engines. The perfect accent to finish off your engine.

Swingarm Pivot Bolt Cover for Sportsters
Fits: '91-'03 Sportster Models

Does that nasty looking zinc-plated swing arm pivot bolt bother you as much as it did us? This slick little pivot cover puts a nice, clean finish on it in a matter of minutes.  No tools needed for installation.

Vertical Side Mount License Holder with Light
For ''86-'08 XL models.

If they zig, you can zag by moving your license plate off the rear fender to the side. This side- mount license holder with light creates a show-like look and adds visibility with a red L.E.D run & brake light complete with license plate illumination. Its smooth design shows no visible fasteners around the plate. Removable inserts allow it to accommodate both small (4" x 7") and large (4-3/8" x 8") plates.

INSTALLATION INSTRUCTIONS

Lighted License Plate Frame
Fits 4" x 7" Plates

This chrome die cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake and tail lamp circuits or together for an extra bright stop or running light or use your imagination. Fits: 4" x7" Plates

Note: Not intended to replace O.E. brake or taillight.

L.E.D. License Plate Illuminators with Turn Signal Accents

Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate and the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 5/16” mounting stud makes it simple to bolt them on, wire them in, and ride on!

License Plate Mounting Hole Cover with Emblems
Fits All H-D models with standard 3-bolt fender mounted license plate bracket. (Also cover the fourth hole found on some Sportster models).

With so many riders using our Side Mount License Plate Mounts or Bullet Style Rear Turn Signal Brackets, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. This cover installs in minutes and completely covers the "footprint" left by the stock mount. This cover comes with interchangeable Zombie and Maltese Cross emblems.

INSTALLATION INSTRUCTIONS

Tribal License Plate Mounting Hole Cover
Fits all H-D models with standard 3-bolt fender mounted license plate bracket. (Also covers the fourth hole found on some Sportster models.)

With so many riders using our Side Mount License Plate Mounts or Bullet Style Rear Turn Signal Brackets, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. This cover installs in minutes and completely covers the "footprint" left by the stock mount.

INSTALLATION INSTRUCTIONS

Curved Side Mount License Holder with Taillight
Fits: '86-'08 Sportster Models

In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style and function. Sized to fit 4" x 7" plates only, this trick product is available with or without an auxiliary run-brake taillight.

INSTALLATION INSTRUCTIONS

The Marquis Choke Knob
Fits All '88-'06 XL Models
U.S. Patent #5,836,214

Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it is easier to find and get a hold of too.

INSTALLATION INSTRUCTIONS

Raptor Bar
Forged for strength and rigidity, then polished and chrome plated for beauty. Stylized inserts on the cross member look cool and cover holes used to mount Iron Cross L.E.D. light. Approximately 12” tall.

Fits: All '04-'08 Sportster models with H-D detachable side plates.

INSTALLATION INSTRUCTIONS

Iron Cross L.E.D. Light

Quickly and easily fastens to the Raptor Bar. L.E.D. design operates a an auxiliary running and brake light. This awesome light measures approximately 4-1/2" x 5" x 3/4" thick so it can easily find a home in almost any custom application.

INSTALLATION INSTRUCTIONS